Free tool · Windows x64 · edelkrone SDK
mh_Motion_Control
Studio work from a compact edelkrone rig.

Motion-controlled image capture built around edelkrone’s ONE series — HeadONE and SliderONE — on Windows: turntable capture and photogrammetry, HDR panoramas, keyframed Bezier moves, timelapse planned like an intervalometer and smooth real-time moves for video — with every photo saved at the position it was actually taken.

Built by a Visual Effects (VFX) supervisor and motion capture TD who wanted his own compact rig to do more: one tool that thinks like a camera operator — set up the shot, press START, and get photos you can trust.

Windows 10 / 11Bluetooth LEHeadONESliderONELinked rigdigiCamControlPTGui · HuginRealityScan · Metashape · COLMAPFree

mh_Motion_Control is not made or endorsed by edelkrone, but is an example of what’s possible with the edelkrone SDK. Links to edelkrone gear on this page are affiliate links.

Watch
See it move
In action
mh_Motion_Control main window: the MOTION tab with keys, graph editor and timelapse planning
Modes
What it does
Four ways to shoot, one rig

All of it runs on a HeadONE or two and a SliderONE: the computer does the planning, the measuring and the bookkeeping. Each kind of shoot has its own tab, Help → How do I… walks through each one in a few steps, and every control has a tooltip.

Turntable & photogrammetry
A HeadONE on the Turntable Module turns the object through any number of positions per turn, while a tilt HeadONE and a SliderONE change the camera angle and height between rings.
  • PLAN A CAPTURE sets the whole capture up for you
  • Projects for RealityCapture / RealityScan, Metashape and COLMAP with every camera already placed, upright and close to real scale
  • Optional backlit pass for clean masks; an HTML spin viewer to share
  • A stopped capture can be resumed
Panorama & HDRI
A spherical grid worked out from your lens (rectilinear or fisheye), sensor and overlap — or just the rows you choose.
  • Zenith and nadir, with a map of overlap and gaps
  • 3 to 9 bracketed exposures per position, stepped by the tool or by the camera’s own AEB / BKT
  • PTGui and Hugin projects that open with every frame in place
  • A stopped panorama can be resumed
Motion & timelapse
Keyframed moves on the pan head, tilt head and slider together, with Bezier ease in and out in a graph editor.
  • Timelapse planned like an intervalometer: shoot time and interval in h:mm:ss
  • Step-and-shoot or continuous timelapse, and stop motion
  • One smooth real-time move for video
  • Keys are the stored positions P1–P6, as in the edelkrone app
Focus stacking
The slider becomes the macro rail: the camera steps through the subject from near to far, one photo per step, with the focus ring left alone.
  • Near and far set by hand while you watch the live view
  • The step from the lens (magnification, aperture, overlap), typed, or by the number of photos
  • For a macro lens up to 1:1 or a close-focusing lens
  • Ready for Helicon Focus, Zerene Stacker and the like
Under every mode: rig control
Joysticks with axis lock, live position readouts, MOVE BY / MOVE TO and the six stored positions, shared with the edelkrone phone app.
Rig Control
RIG CONTROL (Ctrl+J) floats over every tab, so the rig can be posed whatever you are setting up.
One linked rig
Pan head, slider and tilt head linked as one rig: every move starts and ends together.
Safe by design
STOP or Esc halts everything, at any time; tilt limits keep the lens clear of the rig.
Time
Motion tab
Timelapse

Plan a sunset the way you would on an intervalometer: three hours, a photo every five minutes — the tool works out the 37 photos. Prefer to plan by the finished clip? Set 10 s at 25 fps and the interval, and the shoot time follows.

Pose the start, pose the end, add keys in between, and shape the move with ease curves. In a timelapse the keys read as times into the shoot — a key at 1:30:00 is reached halfway — and the photos come on a steady clock from the first one, with the move and settle inside each interval.

ModeWhat it does
TimelapseStep and shoot: the rig moves to each frame’s point on the curve, settles, and shoots on the interval.
ContinuousOne smooth move run by the units themselves, a photo every interval while it moves.
Stop motionWaits for CONTINUE before each photo, so you can set the scene.
Real-timeOne smooth move for video, played by the units’ own keyframes, with PREVIEW MOVE and STRETCH.
Plan by — Shoot time, Clip length or Frames, each with the interval. The plan line shows the photos, the shoot time, when it ends, and the clip it gives.
Measure
Built to be trusted
Precise & measured

The software is where a compact rig gains its precision: it learns your units, checks every landing and records where each photo was really taken.

Precision tuning
A short automatic routine learns how your gear moves with your camera on it, so every move afterwards is as precise as the rig allows.
Every photo logged
An XMP sidecar per photo and a CSV log per session, with the planned and the measured position, including the camera pitch.
Tilt limits
Set once by hand with the real lens and cable. The joystick, MOVE BY and the panorama rows stay inside them; the tilt reads as camera pitch.
Safe by design
STOP or Esc halts everything. Stall, signal and dead-man guards on every move, slider ends respected, low-battery checks.
Any camera
Nikon and Canon over USB through the free digiCamControl, or any brand through its maker’s tethering software via a watch folder.
Resume
A turntable capture or panorama stopped by a power cut picks up where it left off.
Gear
What you need
Requirements
Windows10 or 11, 64-bit. No installer, Python or other software needed — unzip and run.
BluetoothBluetooth LE — built in, or a USB adapter.
edelkrone gearHeadONE (Turntable Module or Tilt Module) and / or SliderONE. Any mix, on its own or linked as one rig. One unit is enough to start; each unit you add opens up more.
CameraOptional. Nikon / Canon over USB via digiCamControl (free), or any brand via its own tethering software.
Screen1920 × 1080 or larger.

Writes: XMP sidecars, CSV session logs, PTGui (Papywizard XML) and Hugin projects, RealityCapture / RealityScan sidecars and masks, a Metashape reference file, a COLMAP known-pose model, and an HTML spin viewer. Photos stay in whatever format the camera saves.

Links to edelkrone gear on this page are affiliate links. Buying through them supports these free tools at no extra cost to you.

Get it
Version 1.1.0 · Windows x64
Download

The release zip holds the program, the User Manual and Quick Start (PDF), the licence and the checksums. Unzip anywhere and double-click; close the edelkrone phone app first.

Security
The program is signed with a Certum code signing certificate, RFC 3161 timestamped, and submitted to Microsoft (WDSI) and VirusTotal before release. Each release carries SHA256SUMS.txt and a signed catalogue.
Licence
Free software, © 2026 Martin P. Heigan, licensed CC BY-NC-ND 4.0. Free to download and use; the licence in the zip gives the full terms.
Help
The User Manual, the Quick Start and Help → How do I… in the program answer most questions, and every control has a tooltip. Updates appear on GitHub; Help → Check for Updates tells you when there is a new one.
edelkrone MCP Challenge — mh_Motion_Control is an entry in the 2026 edelkrone MCP Challenge, built on the edelkrone SDK.

The tool moves real equipment: keep the motion path clear of people and objects, and know where STOP is before you press START.

edelkrone, HeadONE and SliderONE are trademarks of their owner. digiCamControl, RealityCapture, RealityScan, Agisoft Metashape, COLMAP, PTGui, Hugin, Papywizard, Canon, Nikon and other names are the property of their owners and are used only to describe compatibility.

MOTION
MH_MOTION_CONTROL
HOME » TOOLS » MH_MOTION_CONTROL

  anti-matter-3d.com | © Martin P. Heigan